1st Compress a small amount of resin from the red and white tubes onto a clean surface.
2º Mix the two parts of the set with a clean spatula or a toothpick. The mixture of the two elements, when uniform, ensures uniform operation.
3rd For better adhesion, clean the repair area with sandpaper and remove all loose encrustations, dirt or other foreign materials.
4º Do not apply Red Epoxy on surfaces wet with solvent or other liquid. Place a small amount of Red Epoxy on the break or area to be repaired. Be sure to use enough Red Epoxy to cover the area to be repaired.
5º To accelerate the curing time, use a heat gun or a hair dryer around the area (± 20 cm) where the Red Epoxy was applied. Never blow air directly into the application!
6º S and you want a cure without heating, the estimated time is 24 to 48 hours depending on the temperature and humidity of the place.
 

Note: Do not use a direct static flame to heat Red Epoxy. To prevent overheating, heat and brush slowly and evenly over the repair site. Overheating can result in the product charring which will cause it to lose its effectiveness.